LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS EH40 Shipbuilding steel plate

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS EH40 shipbuilding steel,Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.
It is the Hull structural steel,with it's good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.This kind of steel can be used in the manufacture of the ocean ship's hull structure whose weight is above 10000 tons.

EH40 shipbuilding steel plate specification:
Thickness: 4mm to 260mm, Width: 1200mm to 4000mm, Length: 3000mm to 18000mm.

EH40 shipbuilding steel  Mechanical Property Chemical Composition %

Grade	C max	Si max	Mn	P max	S max	Als min	Ti max	Cu max	Cr max	Ni max	Mo max	Nb	V
EH40	0.18	0.50	0.90-1.60	0.035	0.035	0.015	0.02	0.35	0.20	0.40	0.08	0.02-0.05	0.05-0.10

Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.40% (thickness ≤ 50mm). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

EH40 shipbuilding  steel  Mechanical Property  Mechanical Property

Grade	Rm (MPa)	Re(MPa) min	A% min	Akv/J min
EH40	510-660	390	20	E.T °C	Thickness (mm)
				-20	≤ 50		>50-70		>70-100
					L	C	L	C	L	C
					41	27	-

 Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

EH40 shipbuilding steel  Condition Of Delivery

Grade	Fine grains elements	category	The thickness of steel
			≤ 12	>12.5-20	>20-25	>25-35	>35-50	>50-100
EH40	any	Plate/ sheet	N,TM,Q&T					-
		Profile steel	N(25),TM(25),Q&T(25)

EH40 shipbuilding steel Available Specification

variety		Thickness (mm)	Width (mm)	Longth/ inner diameter (mm)
Shipbuilidng plate	cutting edges	6~200	1500~3000	3000~15000
	non- cutting edges		1300~3000
Shipbuilidng coil	cutting edges	1.2~19	1500~2000	760+20~760-70
	non-cutting edges		1510~2010

EH40 shipbuilding steel theoretical weight

Thickness (mm)	theoretical weight		Thickness (mm)	theoretical weight
	Kg/ft2	Kg/m2		Kg/ ft2	Kg/m2
6	4.376	47.10	25	18.962	196.25
7	5.105	54.95	26	20.420	204.10
8	5.834	62.80	28	21.879	219.80
10	7.293	78.50	30	23.337	235.50
11	8.751	86.35	32	25.525	251.20
12	10.21	94.20	34	26.254	266.90
14	10.939	109.90	35	27.713	274.75
16	11.669	125.60	40	29.172	314.00
18	13.127	141.30	45	32.818	353.25
20	14.586	157.00	48	35.006	376.80
22	16.044	172.70	50	36.464	392.50
24	18.232	188.40

EH40 shipbuilding steel dimensional deviation

nominal thickness（mm）	The thickness deviation with following width (mm)
	≤1200	>1200~1500	>1500~1800	>1800
>6.0~8.0	±0.29	±0.30	±0.31	±0.35
>8.0~10.0	±0.32	±0.33	±0.34	±0.35
>10.0~12.0	±0.35	±0.36	±0.37	±0.43

nominal thickness（mm）	minus deviation (mm)	The thickness deviation with following width (mm)
		> 1000 ~1200	> 1200 ~1500	> 1500 ~1700	> 1700 ~1800	> 1800 ~2000	> 2000 ~2300	> 2300 ~2500	> 2500 ~2600	2600 ~2800	> 2800 ~3000
>12~25	-0.8	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.8	+1.0	+1.1	+1.2
>25~30	-0.9	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.1	+1.2
>30~34	-1.0	+0.2	+0.3	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.2	+1.3
>34~40	-1.1	+0.3	+0.4	+0.5	+0.6	+0.7	+0.9	+1.0	+1.1	+1.3	+1.4
>40~45	-1.2	+0.4	+0.5	+0.6	+0.7	+0.8	+1.0	+1.1	+1.2	+1.4	+1.5

Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

If you want to know more information about EH40 Shipbuilding steel plate, please contact us and let us know your required specification, the best price will be quoted in shortest time.